As an Amazon Associate I earn from qualifying purchases for my recommendation or link to any products from this website.

Media Experience

Learn to Build a Smart Home, One Step at a Time

You are here: Home / Lessons / Prepare Case

Prepare Case

Value HTPC Case

gd06_interior(1)
Before installing components inside the Silverstone case it is good to prepare the case so that it is ready for later installation steps.

  1. Remove the cover panel and unscrew all the brackets from the case.
  2. Remove all three stock case fans as they are a bit too loud for home theater environment.
  3. Install one Noctua case fan to the position that is nearest to the motherboard’s panel slot.

Performance HTPC Case

Gaming_HTPC_case
Before installing components inside the Silverstone ML07 case it is good to prepare the case so that it is ready for later installation steps.

After that unscrew the screws from the graphics card support bracket and PSU bracket and then remove them.

  1. Unscrew the screws from the rear of the case and remove the top cover.
  2. Unscrew the screws from the graphics card support bracket and then remove it.
  3. Unscrew the screws from the PSU bracket and then remove it.
Back to: The HTPC Blueprint > Level 3: Build Your System
Copy link
CopyCopied
Powered by Social Snap